The Communication Will Consist Of Data Transfer In Which We Are Using GSM Module For Making It As Wireless Communication. GSM Is Used In This Project For Making Better And Longer Distance Communications. In This Project We Are Using Embedded Microcontroller For Implementing This Technique In Home Or Industries. The Appliances Like Fridge, Bulb, Fan, Television Etc., Are Connected To The Microcontroller Through The Relay. We Can Switch ‘ON’ And ‘OFF’ The Appliances By Using Switches Whenever We Need. The Power Consumed By The Appliances Is Measured. The Consumption Of Power By The Appliances Is Measured By The Sensing Unit. The Power Used Is Calculated With The Help Of Current Transformer. The Current Transformer, Which Gives The Current Consumed By The Appliances And Then The Current, Is Converted Into Voltage By The Current To Voltage Converter. The Step Down Transformer Will Help The Voltage To Convert Into 5V. The Consumption Of Power Is Finding Out By The Program Loaded In Embedded Controller. In Order To Save The Power We Are Proposing Two Types Of Wiring I.e. Normal Wiring And Restricted Wiring. Under Normal Mode We Can Use Maximum Power And Under Restricted Mode The Restricted Power Is Activated In Order To Manage The Power Across The Area. Under Restricted Period We Can Use Only Limited House Appliances When The Usage Of Power Is Beyond The Limited Power Automatically The Buzzer Will Give An Alarm To Alert The Consumers In Order To Switch Off The Unused Appliances Within A Limited Period Of Time. If The Consumer Fails To Switch Off The Unused Appliances Within A Period, Automatically The Power Will Shutdown In The Consumer House.