This Paper Presents The Design And Implementation Of RF Remote Temperature Speed Controlled Fan. Most Of The Fans Installed At Home And Offices Are Operated Manually And Physically Challenged Persons Find It Stressful To Control The Fan Operating At A Distance Around Them. Also, At Night People Find It Difficult To Wake Up To Reduce The Speed Or To Switch ON/OFF The Fan While They Lie On The Bed. This Issue Has Called For Serious Concern And Radio Frequency (RF) Remote Temperature Speed Controlled Fan Is Considered And Developed. The System Will Enable The Physically Challenged Persons Or Individual At Night/day To Control The Speed Of Fan Operating Around Them Without Moving Close. The System Has Transmitter And Receiver Units. The Transmitter Unit Is The RF Remote Device Which Enables The Operator To Adjust The Speed Of The Fan. The Receiver Unit Attached To The Body Of The Fan Receives The RF Signal And Controls The Fan Speed As Selected By The User. When Installed, The Temperature Sensor In The Receiver Unit Reads The Room Temperature Automatically And Regulates The Speed Of The Fan. If The Room Temperature Increases, The Speed Of The Fan Will Also Increase. The Fan Operates In Two Modes Namely Manual And Automatic. In The Manual Mode, The Speed Of The Fan Is Regulated By The User By Using The RF Remote Device Whereas, In The Automatic Mode, The Receiver Control Unit Controls The Speed Of The Fan With Respect To The Current Room Temperature Sensed. The Fan Is Designed To Switch Off When Temperature Drops Below A Set-point, In Order To Conserve Energy